TX-3
TX-3 is a rapid set, high strength low viscosity urethane repair material. This two part, 1:1 system is 100% solids and designed for rebuilding and repairing broken control joints, filling voids under tile and concrete, and repairing spalled concrete surfaces very quickly. TX-3 is intended for use in damaged control joints or warehouse spall damage created by forklifts or carts with steel or hard urethane wheels.
Features:
Cures From -20ºF to 130ºF
Drive-Over in 45 minutes
Produces High Strength Quickly
Self-priming and self-leveling
Can be mixed with dry aggregate
Meets USDA and FDA Requirements
Meets the United States Green Building Council’s
LEED® standards for IEQ Credit 4.1
Applications:
Rebuilding control joints
Traffic area spalls & crack repairs
Grade matching
Floor repair
Fill & repair spall before coating
Used to “knit” cracked slabs
Fill voids under concrete or tile
HTS taken the unique steps to create direct color matches to alternative products as opposed to offering a standard color as an approximate match. This will ensure the closest possible match to the color of an alternative product. If you want to order a color-matched tint pack, call our customer service team to place a special order item. Refer to the Color Chart for Available Color Matches.
TX-3 is a rapid set, high strength low viscosity urethane repair material. This two part, 1:1 system is 100% solids and designed for rebuilding and repairing broken control joints, filling voids under tile and concrete, and repairing spalled concrete surfaces very quickly. TX-3 is intended for use in damaged control joints or warehouse spall damage created by forklifts or carts with steel or hard urethane wheels.
Features:
Cures From -20ºF to 130ºF
Drive-Over in 45 minutes
Produces High Strength Quickly
Self-priming and self-leveling
Can be mixed with dry aggregate
Meets USDA and FDA Requirements
Meets the United States Green Building Council’s
LEED® standards for IEQ Credit 4.1
Applications:
Rebuilding control joints
Traffic area spalls & crack repairs
Grade matching
Floor repair
Fill & repair spall before coating
Used to “knit” cracked slabs
Fill voids under concrete or tile
HTS taken the unique steps to create direct color matches to alternative products as opposed to offering a standard color as an approximate match. This will ensure the closest possible match to the color of an alternative product. If you want to order a color-matched tint pack, call our customer service team to place a special order item. Refer to the Color Chart for Available Color Matches.
TX-3 is a rapid set, high strength low viscosity urethane repair material. This two part, 1:1 system is 100% solids and designed for rebuilding and repairing broken control joints, filling voids under tile and concrete, and repairing spalled concrete surfaces very quickly. TX-3 is intended for use in damaged control joints or warehouse spall damage created by forklifts or carts with steel or hard urethane wheels.
Features:
Cures From -20ºF to 130ºF
Drive-Over in 45 minutes
Produces High Strength Quickly
Self-priming and self-leveling
Can be mixed with dry aggregate
Meets USDA and FDA Requirements
Meets the United States Green Building Council’s
LEED® standards for IEQ Credit 4.1
Applications:
Rebuilding control joints
Traffic area spalls & crack repairs
Grade matching
Floor repair
Fill & repair spall before coating
Used to “knit” cracked slabs
Fill voids under concrete or tile
HTS taken the unique steps to create direct color matches to alternative products as opposed to offering a standard color as an approximate match. This will ensure the closest possible match to the color of an alternative product. If you want to order a color-matched tint pack, call our customer service team to place a special order item. Refer to the Color Chart for Available Color Matches.
